Oven Not Heating in Denver? Here Is What Is Wrong

An oven that will not heat is one of the most disruptive appliance failures in a home. Whether you have an electric range or a gas oven, the diagnosis is usually straightforward — and most repairs are completed in a single visit.

Here is what causes ovens to stop heating and what you can expect to pay for repairs in Denver.

The bake element is the coiled heating element at the bottom of the oven cavity. It is the most common cause of an electric oven not heating.

Signs of a failed bake element:

• The oven does not heat at all on bake mode
• You can see a visible break, blister, or burn mark on the element
• The element glows unevenly or only partially

Repair cost: $100–$200 parts and labor. This is one of the most common and affordable oven repairs.

The broil element is at the top of the oven cavity. If the broil function does not work but bake does, the broil element has likely failed.

Repair cost: $100–$200 parts and labor.

The temperature sensor (also called the oven probe) monitors the oven temperature and signals the control board to cycle the heating elements on and off. A failed sensor causes the oven to heat unevenly, not reach temperature, or display an error code.

Common error codes: F3, F4 on most brands.

Repair cost: $100–$200 parts and labor.

The control board manages all oven functions. A failed board can cause the oven to not heat, display error codes, or behave erratically.

Repair cost: $200–$450 parts and labor. On older ovens, weigh this against replacement cost.

Some ranges use electric ignition for gas burners. If the igniter fails, the burners will not light. This is separate from the oven heating element.

The igniter is the most common cause of a gas oven not heating. It serves two functions: it glows to ignite the gas, and it draws enough current to open the gas safety valve.

Signs of a failing igniter:

• The igniter glows but the oven does not light (the igniter is too weak to open the gas valve)
• The igniter does not glow at all
• The oven takes a very long time to preheat

Repair cost: $125–$250 parts and labor.

If the igniter is glowing brightly but the oven still does not light, the gas safety valve may have failed. This is less common than igniter failure but does occur on older units.

Repair cost: $175–$350 parts and labor.

Same as electric ovens — the sensor monitors temperature and signals the control board. A failed sensor causes inaccurate temperatures or no heat.

Repair cost: $100–$200 parts and labor.

Uneven heating is a common complaint, especially in older ovens. Causes include:

• Failed bake or broil element (partially failed — glows but does not reach full temperature)
• Failed temperature sensor — the oven cannot accurately regulate temperature
• Worn door gasket — heat escapes around the door, causing hot and cold spots
• Calibration drift — the oven's temperature calibration has drifted over time

Many ovens allow you to recalibrate the temperature through the control panel. Check your owner's manual. If recalibration does not help, a technician can diagnose the underlying cause.

Viking, Wolf, and other professional-grade ranges require specialized technicians. Parts are brand-specific, and the repair process differs from standard residential ovens. Budget 40–80% more for parts and labor on professional ranges.

We service Viking ranges across Denver metro and carry common Viking parts on our trucks.

A standard electric or gas range costs $600–$1,500 new. Most oven repairs cost $100–$300 — well worth it. Consider replacement if:

• The control board fails on a unit that is more than 12 years old
• Multiple components fail at the same time
• The cost of repair exceeds 50% of replacement cost

We offer same-day and next-day oven repair across Denver, Aurora, Lakewood, Thornton, Westminster, Arvada, and Centennial.

Call (720) 333-0874 for an upfront quote before we start any work.